Pulley Lagging Rubber Sheet

Fuel Dispensing Hoses

HomeRubber Hoses Electrically Bonded Road & Rail Tanker Rubber Hose

Construction:
Tube : Uniform seamless lining of suitable rubber compounding highly resistant to Petroleum Products.

Reinforcement : Plies of woven textile which is well rubberized from both sides with a suitable rubber compound and a helical GS wire embedded between the fabric plies.

Electrical Bonding : Low resistant electrical bonding wire is in incorporated between the reinforcement plies to provide electrical continuity along the whole length of the hose.

Cover: Smooth/ Corrugated synthetic rubber compound which is resistant to weather, abrasion, and petroleum products.

End Connection : Hose can be supplied with built in nipple, with or without flanges.2

APPLICATION
This hose is used for loading/ unloading of Road/ Rail Tanker carrying Petroleum and blended products which have an aromatic hydrocarbon content of maximum 25%.

TECHNICAL SPECIFICATION

SIZE Working Pressure
7 Kgf/cm2
Bursting Pressure
28 Kgf/cm2
Working Pressure
10 Kgf/cm2
Bursting Pressure
40 Kgf/cm2
Working Pressure
15 Kgf/cm2
Bursting Pressure
60 Kgf/cm2
MM INCH
63.00 2.1/2 8.5 6.5 10.5 8.5 - -
75.00 3 10.0 7.5 12.0 10.0 - -
100.00 4 15.0 11.0 18.0 14.0 - -
150.00 6 30.0 22.5 36.0 24.0 48.0 31.5
200.00 8 45.0 28.5 51.0 36.0 63.0 43.5
250.00 10 - - 66.0 49.0 78.0 66.0
300.00 12 - - 81.0 66.0 93.0 80.0

Service Temperature Range:-
-40o F to +158o F
 Santosh Rubber Industry Twitter Santosh Rubber Industry Facebook RSS Feed RSS FeedRSS Feed Copyright © 2010 Santosh Rubber Industry ( Rubber Sheets Manufacturers )
All Rights Reserved. Designed by Anuj Kr. Jain-9891417740